Commodities are widely used in construction, handicrafts, custom-made wire mesh, production and manufacture of galvanized chain link fence, wall mesh, highway guardrail, packaging design and ordinary civil type, etc. Application methods: use galvanized steel strip, pull The key methods of pulling the structure reinforcement are: figure-eight, inverted figure-of-eight, cross, and zigzag or reverse zigzag, etc.
Various pulling methods can be applied independently or combined with two or more. The pulling should be symmetrical. When the pulling structure is reinforced, the single or double-strand galvanized steel strip should be reciprocatingly surrounded between the two tie points of the cargo and the vehicle, and the galvanized steel strip should be tightened to make all the strands tight. Maybe each other. After the remaining parts are crossed around their own ropes, they should be tightened with a winch, and the rest of the house faces into the car.
The
should effectively select the pull direction on the cargo. To avoid the horizontal movement of the goods, the pulling direction should be as low as possible; to avoid the collapse of the goods, the pulling direction can be appropriately higher. Matters needing attention: The diameter of the galvanized steel belt for pulling should not be smaller than 4mm, and the diameter of the galvanized steel belt for binding should not be less than 2.6mm.
